Pro-Race Engineering Own Branded Products

 
1 - 11 of 11 items
Sort By:

CP PRE 2.0L TFSI Piston and Rod Combo 21mm Pin

CP PRE 2.0L TFSI Piston and Rod Combo 21mm Pin

CP Piston and Pro-Race Engineering drop in combo This kit consists of a CP stock bore (82.5mm) stock compression (9.8:1) piston combined with PRE 144x21mm I beam rod. PRE Rods Pro-Race Engineering have released our own line up of connecting rods....

  • Price: £1,000.00
  • Sale Price: £900.00

PRE & JE Heavy Duty 1.8t Rod and Piston Combo 144x21

PRE & JE Heavy Duty 1.8t Rod and Piston Combo 144x21

This package supplied by Pro-Race Engineering is the ultimate combo for the hardcore build. These combine the strong I beam rifle drilled rods with the heavy duty JE pistons held together by a 21mm tool steel wrist pin. Perfect combo for them...

  • Price: £1,150.00

PRE 06A Manual Timing Belt Tensioner Kit

PRE 06A Manual Timing Belt Tensioner Kit

Don't let your 1.8T 20V engine suffer a complete failure due to a faulty stock hydraulic tensioner! Upgrade to a reliable manual timing belt tensioner kit Product Features • Provides reliable manual timing belt tension • Replaces the...

  • Price: £145.00
  • Sale Price: £125.00

Pro-Race Engineering 1.8t Engine strengthening packages

Pro-Race Engineering 1.8t Engine strengthening packages

Engine strengthening kits to suit anything from having the extra bit of security on K04 and K03 hybrid builds to capable of well over 400hp. Pistons would make a nice addition to anything above stage 3 to make a very solid motor. Stage 5 with...

  • Price: £520.00

Pro-Race Engineering 1.8t Stroker Kit TFSI 2008cc

Pro-Race Engineering 1.8t Stroker Kit TFSI 2008cc

This stroker kit includes Pro-Race Engineering 20mm rods, JE Pistons, and a genuine forged VW 2.0 FSI crank shaft. It utilizes an 83mm bore JE piston to achieve 2008CC displacement, with 9.5:1 Compression.

  • Price: £1,950.00

Pro-Race Engineering 144x19 Rifle Drilled I Beam Con Rod Tapered

Pro-Race Engineering 144x19 Rifle Drilled I Beam Con Rod Tapered

Pro-Race Engineering have released our own line up of connecting rods. These are a set of 4 I beam connecting rods which are perfectly suited for strenghtening the bottom end of your 1.8t or TFSI motor. They have small end pin oiling like OEM...

  • Price: £395.00
  • Sale Price: £350.00

Pro-Race Engineering 144x20 Rifle Drilled I Beam Connecting Rod

Pro-Race Engineering 144x20 Rifle Drilled I Beam Connecting Rod

 

  • Price: £395.00
  • Sale Price: £350.00

Pro-Race Engineering Billet Crank Timing Pulley 1.8t and TFSI

Pro-Race Engineering Billet Crank Timing Pulley 1.8t and TFSI

Press fit gear for the most reliable setup Eliminate the concern of shearing your 1.8T timing drive gear keyway once-and-for-all with this billet replacement. The factory gears are notorious for coming loose in high RPM conditions, leading to the...

  • Price: £200.00

Pro-Race Engineering Tall Billet Main Caps 1.8t 06A

Pro-Race Engineering Tall Billet Main Caps 1.8t 06A

1.8t 06A Billet main caps manufactured out of 4340 steel for the ultimate strength in your bottom end. These are not fo the faint hearted builds and require machining to fit correctly. These are the same caps that are offered with our girdle kits...

  • Price: £450.00

Pro-Race Engineering Girdle Kit for 06A 1.8t

Pro-Race Engineering Girdle Kit for 06A 1.8t

Pro- Race Engineering 1.8t Girdle kit We supply these kits to strengthen your bottom end and reduce flex across the block. Any flex in your bottom end will reduce the bearings service life and promote wear. There's 2 kits available for the 1.8t...

  • Price: £495.00
  • Sale Price: £450.00